Home > FAQ > About product information >

How To Operate A Comb Binding Machine?

News Group

How To Operate A Comb Binding Machine?

Update Time:2018-04-26

How To Operate A Comb Binding Machine?

 Today we're answering the question how to operate a comb binding machine. Certainly one of the most popular and economic ways of binding a book, presentation, or project, is with plastic combs. There are a number of comb binding systems on the market; let's look at one, all of its parts, and how it works.

First, let's look at all the basic parts of a common comb binding machine. Almost all comb binding systems will have a punch, either electronic or manual, that punches holes through your entire project consistently. In terms of binding, there will be a lever that is the comb opener. It opens the plastic combs, and allows you to thread the project through and close the comb around it. Most comb binding systems have margin control knobs or dials. And some systems even have depth of margin control knobs that allow you to change the margin size according to size of project. Many comb binding systems will have measuring tools that will help you choose the right size comb for the thickness of your specific book. And since the chips must fall, a waste bin is built into the machine.

On this EcoBind C made by Akiles, let's watch a step-by-step demonstration of a book being made. Beginning with the covers, place them faced down on the punched side into the throat of the machine. This is where the side margin control and depth of margin control comes into play. You set them so all punches will be consistent throughout your project and you make your punch. This is certainly where electronic punching and punch capacity make all the difference. Spend the time that you need to punch through the rest of the papers in your project.

And now we have arrived at the binding part. First is comb selection. This is where you use the built-in measuring tools to make sure you get the right size comb for the thickness of your book. Once you have selected your comb, you feed it onto the teeth of the comb opener. You use the lever on the machine to open the teeth of the comb. Now it's time to thread your project over the teeth of the comb. This is a little tricky at first but you'll get the hang of it. Close the teeth of the comb with the same lever and you're all set.

Certainly all binding machines and systems work differently but that's basics of how to use a comb binding machine. For more articles, how to's, demos, and reviews on all things binding.

Just tell me what you want, a customized product is welcome!