Home > News > product news >

The main principle of the the manual creasing machine

The main principle of the the manual creasing machine
Issue Time:2012-03-15

Binding machines typically useful companies and schools to develop a small booklet. Treadmills to plug in in a large stack of paper, manual creasing the organization of brochures, publications and reports. The foremost binding machine is really spiral or comb binding machine. Although the washing machine utilize a slightly different technology, they gave similar results. Shackles of look more sophisticated and professional than binding. The binding machine is slightly different brand, and so the manual can provide additional guidelines.
Spiral
A spiral mold will die cutting machine. Push the handle until freeze placed the spiral.

2 Set the right measurement of your vane sliding up or down. Device will need to have 11-inch and 8-1/2 inch and 5-1/2 inch and 4-1/4 inch gap.

Three test machines. Insert the proper length and width paper, then press the pedal. Eliminate the paper and confirmed in which the hole on the right position. The hole could be in the left side of paper, binding consumable and will be taught in paper from top to bottom.

4 Insert the file you need to bind. Do not quite a few machines. Most machines have a very maximum capacity of between 10-30. Symbol across the machine, it's best to tell your maximum capacity. Press the pedal, to be sure that a punch.

5 papers by hole slide binding.

Comb Binding
An adjustment expected to punch mold and profits. Slide directly into the machine slowly move the appropriate location.

2 Insert gadget required pages.

3 Pull the handle red page.

4 inserted through the machine in close contact with the comb.

5 Insert the comb could easily get fingers also, binding machine the finger holes from the perforated paper.

ADDRESS:

Jingda Road ,Shanlian Development Zone , , Hangzhou , ZheJiang

PHONE:

+86-571-88963565
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*E-mail
 
/
*Title
*Content

Agree to use terms of service