Power: This power control to make punch easy and enhance productivity efficiety
SUPER600 is a heavy duty electric punching machine, which can be used in industry, notebook producing factory ,enterprise and large organizations with firm design. With handsome and commodious appearance, The working platform is also large enough for you to work comfortably.
SUPER600 has advanced motor reducer and special-made mechanical clutch. Motor can run continuously and punching controlled by foot pedal which is easy and safe for operation.
Interchangeable die is easy and fast, which can punch various holes.Closing double wire is also available by changing punching dies into closing die and can close any size of double wire .
Punch thickness:5 mm
Wire closing: 3/16"1 1/4"(5.532 mm)
Punch width: 600mm
Adjustable side margin: 3-6mm
Punch speed: 4860 times/minute
Power voltage: AC220V,50HZ
Machine weight: 270KG
Motor power: 1.5KW
Please note: the punching dies are exchangeable and can be made according to customers' need.
Power"This power control to make punching easy and enhance productivity efficienty
A powerful caoacity waste drawer hold much more shred papers, requires empty punched papers less frequently
Oil-adding system make the machines durable and worry free .
1.Choose the cutting die according to the binding hole.
2.Adjust the guiding rule to set reference point on the sheets, then please fasten the guiding rule.
3.Depth margin adjustment. The width of the margin is determined by the shape of the depth-margin bar that is inserted into the slot under the right side of the mold. It consists of A and B (show as below).
Shape of the cross -section
Anotherdirection of B
Without depth- margin bar
4.Try to punch with one sheet at first, until the margin and the hole are ok(,then start to work .It can punch about 50 sheets and 20 sheets PVC .
Disassemble and install punching dies.(see the accompanying drawing)
1.First, switch off the machine, open the cover,loose the fixed screws of it ,and take out cover upwards.
2.Second, insert two cushions between fixed board and punching bars A at eachside, to make sure that the blade of the punching pins are not abraded.
3.Third, Loose the hexagon screws A and B
4. Assemble the red bracket to the die and then pull out the die by taking the bracketat the right side and keep it in a save place.
5.When installing, push the new dies along with the die guide slot and install. After that, fasten the hexagon boltA and hexagon bolt B and disassemble the red handle