Home / All / Binding machine / Wire Binding Systems /

CW300 Heavy Duty Wire Binding Machine

CW300 Heavy Duty Wire Binding Machine

CW300 Heavy Duty Wire Binding Machine
CategoriesWire Binding Systems
BrandSUPU
ModelCW300
PowerManual
Width300mm
Pitch8.47mm
Hole typesquare, round, oval
Punching thickness25sheets
Binding Thickness143sheets
Number of punch pins34
Disgagement punch pins34
Update TimeMar 29,2024
Detail Information

A4 Size  Manual  Double Wire Binding Machine CW300

A4(11")work widthFull 34disengageable punch dies with hard steel for clean punch hole4 positiondepth side margin can be adjustableA sticker on the machine guide you to select the correct wire dimeterManual Punch & BindingMachine with two seperated handle3:1 Wire Binding Machine ,3:1 wire punching and 3:1&2:1 wire bindingThe paper load is horizontal and has a margin guide to assist the user with the work being done. Maximum binding capacityup to 143 sheets with 3:1 wire,punch up to 32 sheets

  • Manual Punching up to 32 sheets 70g paper each time

  • Punching A4 format,11'' size paper.

  • Binding documents up to 143 sheets.

  • Use all sizes of ring 4.8—14.8mm

  • Side margin is adjustable.

Maximum:

  • Max. bind up 143 sheets 

  • Width 300mm

  • Punch up to 2.5--4mm

Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free Hign capacity waste container requires emptying less frequently

Model Name

CW300

Punch Width

300mm

Punching Thickness

32sheets

Punch Width

8.47mm

Disengagement Punch pins

34

Number of punch pins

34

Binding Thickness

143sheets

Motor

No

Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.

All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.


  • Measure the thickness of the document and select the appropriate apron specification according to the letter

  • Select the correct comb diameter using the document measure


  • Select the correct back margin depth for the number of sheets


  • Select the correct punch profile for the sheet size. Select releasable dies as appropiate 


  • Adjust the wire size adjustable knob in terms of the size of the wire


  • Punch sheets in small batches that do not overload the machine of the use
    (Max 32 sheets)


  • The machine punching when use handle


  • When all punched sheets are loaded on to the wire, press the wire clamp again and take them out


  • Put the sheets on to the binding slot and push the binding handle forward to close the wire



We do a lot of testing before final package to pursue "100% quality" goal!

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Just tell me what you want, a customized product is welcome!